It is not a dream to blend natural lawns with artificial grass. The lawn grass is natural, and the roots of grass are reinforced with plastic, for example by growing the grass on a plastic, net-shaped bottom. In this way, the user friendly nature of the natural lawn combines well with the extraordinary durability of the artificial lawn.
In China, 95% of artificial turf is filled with particles, but many schools tend to neglect the most important construction steps when choosing products. The artificial grass construction technology is very important to the artificial turf maintenance and service life improvement in the later period.
First of all to make technical preparations, make "three links and a flat" and first familiar with the drawings, inspection and acceptance of basic construction quality, laying the site to be clean, the surface should be dry, smooth, no debris, no wax stains, grease, the minimum construction temperature should be maintained Above 10 ℃. Use theodolite or other instrument to measure whether the surrounding facilities are in accordance with the size of the playground. If there is any inappropriateness, it should be immediately modified to allow a tolerance of ± 5 mm.
Secondly, before artificial grass laying, we should inspect the quality of the turf with the artificial grass production unit and check the material quality and density of the turf and whether the weaving process is qualified to meet the requirements of use. A standard site connection point can not exceed 30, at the same time, check the quality of the filler meets the environmental requirements. In the laying process, to use special tools to trim the lawn according to specifications, on the seam, lap the lawn will be cut flush. The use of artificial grass sports venue dedicated glue connection, the joint should not be greater than 2 mm. Bonding temperature can not be too low, the ambient temperature should be selected in the construction of more than 10 ℃ is appropriate; the other should not be rain or rainy weather construction, otherwise it will lead to bonding too long or even cause non-stick.