Artificial turf construction precautions

- Dec 06, 2017-


During the construction, the bonding glue should not be exposed for too long. Due to the solvent evaporation, the adhesive will be too large to be applied.

If the temperature is too low, hot water can be heated to 15 - 20 ℃, you can restore the original state, and the same performance.


Quartz sand, rubber particle pavement:

1, when spreading to be broadcast sowing machine. Quartz sand requires roundness of 80% or more, diameter 0.2-1.5mm.

2, artificial turf field equipment is indeed installed, before laying quartz sand and rubber particles.

3, the laying of quartz sand, according to the design of the amount of sand points into the N times, each shop must be repeated again with a professional carding equipment combing the quartz sand full and dense fall. Any impurities found in the pavement should be removed immediately to ensure quality.

4, the laying of quartz sand to be checked whether the formation and adequate deficiencies to be discretionary.

5, and then filled in quartz sand rubber particles, the same method with quartz sand paving